manualshive.com logo in svg

HP HP 8712ES, Руководство пользователя, Страница: 184 / 507

Поделиться
Скачать
HP HP 8712ES Скачать руководство пользователя страница 184

4-50

ES User’s Guide

Using Instrument Functions

Customizing the Display

The following display annotation areas can be modified or turned on or
off:

• Measurement title and clock

• Measurement channel annotation

• Frequency annotation

• Marker annotation

• Marker number

• Y-axis labels

• Y-axis (relative or absolute scale)

• Limit test Pass/Fail text

• Limit icon

• Limit test Pass/Fail indicator position

Measurement
Title and Clock

The measurement title area consists of two lines of text. In the default or
preset state, this annotation area is toggled off. When the title mode is
initially turned on—by pressing

—line 1 is empty and the clock (date and time of day)

is assigned to line 2.

The

 menu allows you to customize these two lines.

The clock can be shown on line 1, line 2, or can be turned off. You can
enter up to 30 characters of text on either or both lines.

NOTE

When the display is in split display mode, line 1 is shown at the top of
the measurement channel 1 screen, and line 2 is shown at the top of the
measurement channel 2 screen.

To turn the measurement title and clock on or off, press

.

DISPLAY

 More Display

 Title and Clock

 Title and Clock

DISPLAY

 More Display  Title and Clock  Title+Clk ON off

Содержание HP 8712ES




























































































































































































































































































































































































































































































































Отзывы:

Нет отзывов