manualshive.com logo in svg

HP HP 8712ES, Руководство пользователя, Страница: 371 / 507

Поделиться
Скачать
HP HP 8712ES Скачать руководство пользователя страница 371

ES User’s Guide

8-65

Hardkey/Softkey Reference

P

Softkey in the

 menu. Adds or subtracts a phase offset that is

constant with frequency (rather than linear).

Softkey in the more format menu. Displays a polar format. Each point
on the polar format corresponds to a particular value of both
magnitude and phase. Quantities are read vectorally: the magnitude at
any point is determined by its displacement from the center (which has
zero value), and the phase by the angle counterclockwise from the
positive x-axis. Magnitude is scaled in a linear fashion, with the value
of the outer circle usually set to a ratio value of 1. Since there is no
frequency axis, frequency information is read from the markers.

Softkey in the port extensions menu. Allows compensation for phase
shift due to an extended measurement reference plane on port 1.

See

“Port Extensions” on page 5-18

 for more information.

Access Keys:

Softkey in the port extensions menu. Allows compensation for phase
shift due to an extended measurement reference plane on port 2.

See

“Port Extensions” on page 5-18

 for more information.

Access Keys:

Softkey in the port extensions menu. Toggle to ON if you want to
compensate for phase shift due to an extended measurement reference
plane.

See

“Port Extensions” on page 5-18

 for more information.

Access Keys:

Softkey in the define printer menu. Sets printer to print hardcopy so
that paper is oriented with shorter edge at top and longer edges at
sides. Portrait is the default setting, and toggles with Landscape.

Access Keys:

 Phase Offset

SCALE

 Polar

 Port 1

 Extension

CAL

 More Cal  Port Extensions

 Port Ext’s on OFF

 Port 2

 Extension

CAL

 More Cal  Port Extensions

 Port Ext’s on OFF

 Port Ext's

 on OFF

CAL

 More Cal  Port Extensions

 Portrait

HARDCOPY

 Define Printer

Содержание HP 8712ES




























































































































































































































































































































































































































































































































Отзывы:

Нет отзывов