manualshive.com logo in svg

HP HP 8712ES, Руководство пользователя, Страница: 364 / 507

Поделиться
Скачать
HP HP 8712ES Скачать руководство пользователя страница 364

8-58

ES User’s Guide

Hardkey/Softkey Reference

M

Softkey in the min search menu. Places the active marker at the
frequency point of minimum amplitude. If tracking is off, marker
remains at that frequency. If tracking is on, marker moves to the
minimum point with each sweep.

See

“Using Markers” on page 4-3

 for more information.

Access Keys:

Softkey in the clock format menu. Formats the real-time internal clock
to display time as Month-Day-Year Hour:Minute.

Access Keys:

Softkey in the cal kit menu. Allows you to modify the characteristics of
the calibration standards in the calibration kit you have selected. Also
allows you to save this modified kit as either Cal Kit A or Cal Kit B.

See

“Calibration Kits” on page 6-23

 for more information.Access Keys:

 Softkey in the configure VOL_RAM disk menu. Allows you to modify
the memory allocation on the internal non-volatile RAM disk.

Access Keys:

Softkey in the modify kit menu. Accesses a menu with softkey choices
to save, recall, preset, and describe user-defined calibration kits.

See

“Calibration Kits” on page 6-23

 for more information.

Access Keys:

Softkey in the define printer and define plotter menus. Toggles with

 to define printer or plotter as one color (black and white) or

multi-color.

See

“Connecting and Configuring Printers and Plotters” on page 4-68

for more information.

Access Keys:

, or

 Mkr

−

> Min

MARKER

 Marker Search  Min Search

 MM-DD-YYYY

 HH:MM

SYSTEM OPTIONS

 System Config  Set Clock

 Clock Format

 Modify

 (connector type)

CAL

 More Cal  Cal Kit

 Modify Size

SAVE RECALL

 Select Disk

 Configure VOL_RAM

 Mod Kit

 SaveRecall

CAL

 More Cal  Cal Kit  Modify (Cal Kit type)

 Monochrome

 Color

HARDCOPY

 Define Printer

 Define Plotter

Содержание HP 8712ES




























































































































































































































































































































































































































































































































Отзывы:

Нет отзывов