manualshive.com logo in svg

HP HP 8712ES, Руководство пользователя, Страница: 334 / 507

Поделиться
Скачать
HP HP 8712ES Скачать руководство пользователя страница 334

8-28

ES User’s Guide

Hardkey/Softkey Reference

E

Softkey in the max line and min line menus. Sets the end (or stop)
amplitude (height) of a limit line.

See

“Using Limit Testing” on page 4-28

 for more information on limit

lines.

Access Keys:

,

or

Softkey in the secure menu that is used with the IBASIC feature of the
instrument.

See the HP Instrument BASIC User's Handbook for information on the
secure function.

Access Keys:

Softkey in the response cal menu when in S

21

 or S

12

 (transmission)

measurement mode. Select this key to perform a user-defined
enhanced response calibration. Restores a previous enhanced response
calibration if current analyzer parameters are compatible with those
used during the previous calibration. Corrects for frequency response
and source match errors.

 See

“Measuring S21 Forward Transmission using an Enhanced

Response Calibration” on page 3-41

 for more information.

Access Keys:

Softkey inthe title and clock menu. Displays the menu to edit the
screen title on line 1 of the display. Maximum number of characters is
36.

Access Keys:

Softkey in the title and clock menu. Displays the menu to edit the
screen title on line 2 of the display. Maximum number of characters is
36.

Access Keys:

 End Limit

DISPLAY

 Limit Menu  Add Limit

 Add Max Line

 Add Min Line

 End Line #

SYSTEM OPTIONS

 IBASIC  Utilities  Secure

 Enhanced

 Response

CAL

 User Response

 Enter Line 1

DISPLAY

 More Display  Title and Clock

 Enter Line 2

DISPLAY

 More Display  Title and Clock

Содержание HP 8712ES




























































































































































































































































































































































































































































































































Отзывы:

Нет отзывов