manualshive.com logo in svg

HP HP 8712ES, Руководство пользователя, Страница: 333 / 507

Поделиться
Скачать
HP HP 8712ES Скачать руководство пользователя страница 333

ES User’s Guide

8-27

Hardkey/Softkey Reference

E

E

Softkey in the IBASIC menu. Displays the IBASIC edit menu and a
rudimentary word and character editor.

See the HP Instrument BASIC User's Handbook Supplement for more
information.

Access Keys:

Softkey in the limit menu. Displays the menu to change the frequency
or amplitude of previously entered limits, or add a data trace marker.

Access Keys:

Softkey in the mkr limits menu. Displays a menu to set the maximum
and minimum limits on the selected marker limit test.

See

“To Use Marker Limit Functions” on page 4-32

 for more

information.

Access Keys:

Softkey in the

 menu. Adjusts the electrical delay to balance

the phase of the DUT. It simulates a variable length, lossless
transmission line, which can be added to or removed from a receiver
input to compensate for interconnecting cables, etc. This function is
similar to the mechanical or analog "line stretchers" of other network
analyzers. Delay is annotated in units of time with secondary labeling
in distance for the current velocity factor.

Softkey in the max line and min line menus. Sets the end (or stop)
frequency of a limit line.

See

“Using Limit Testing” on page 4-28

 for more information on limit

lines.

Access Keys:

,

or

 Edit

SYSTEM OPTIONS

 IBASIC

 Edit Limit

DISPLAY

 Limit Menu

 Edit Limit

 (Min/Max)

DISPLAY

 Limit Menu  Mkr Limits

 Electrical Delay

SCALE

 End Frequency

DISPLAY

 Limit Menu  Add Limit

 Add Max Line

 Add Min Line

Содержание HP 8712ES




























































































































































































































































































































































































































































































































Отзывы:

Нет отзывов