manualshive.com logo in svg

HP HP 8712ES, Руководство пользователя, Страница: 212 / 507

Поделиться
Скачать
HP HP 8712ES Скачать руководство пользователя страница 212

4-78

ES User’s Guide

Using Instrument Functions

Printing and Plotting Measurement Results

Printing and Plotting Measurement
Results

To print or plot measurement results, perform the following steps:

1. Select the appropriate copy port:

• Printer or

• Plotter or

• File

2. Define the output

3. Generate the output:

• Hardcopy or

• Plot to file

To Select the Copy Port

Press

. Use the front panel knob or

the

 keys to move the highlighted bar to the appropriate

device type/language/hardcopy port. If you select a printer or plotter,
refer to

“Connect the Printer or Plotter” on page 4-70

. When you select a

file, you must select whether to store it on the analyzer's non-volatile
RAM disk or a 3.5” floppy disk in the built-in disk drive. Also, you must
select either an HP-GL, PCL5, or PCX file format. All of these formats
can be imported to many personal computer (PC) applications such as
word processors and drawing programs. This allows a simple method for
screen dumps to be used in reports, memos, or other communications. In
addition, with the LAN feature, you can use FTP to directly get a
hardcopy file in either HP-GL, GIF, or PCX format. See The LAN
Interface User’s Guide Supplement for information.

NOTE

If you are sending hardcopy to an external device (printer or plotter), you
should have already configured the analyzer for use with the printer or
plotter. See the previous section,

“Connect the Printer or Plotter”

 for

more information.

HARDCOPY

 Select Copy Port

Содержание HP 8712ES




























































































































































































































































































































































































































































































































Отзывы:

Нет отзывов