manualshive.com logo in svg

HP 8568B, Руководство по испытаниям и регулировке работы, Страница: 89 / 313

Поделиться
Скачать
HP 8568B Скачать руководство пользователя страница 89

21. Frequency Reference Error 

21. Frequency

Reference Error

Test

Related Adjustment 

Time Base Adjustment

Specification 

Aging Rate

 x 

 and 

 x 

 year; attained after 30 days warmup

from cold start at 

Temperature Stability

 x 

 0” to 

 Frequency is within 1 x 

 of final stabilized

frequency within 30 minutes.

Description 

The frequency of the spectrum analyzer time base oscillator is
measured directly using a frequency counter locked to a frequency
reference which has an aging rate less than one-tenth that of the
time base specification. After a 30 day warmup period, a frequency
measurement is made. The analyzer is left undisturbed for a 
period and a second reading is taken. The frequency change over this

 period must be less than one part in 

Note 

This test requires that the spectrum analyzer be turned on (not in
STANDBY) for a period of 30 days to ensure that the frequency
reference attains its aging rate. However, after aging rate is attained,
the frequency reference typically attains aging rate again in 72 hours
of operation after being off for a period not exceeding 24 hours.

Care must be taken not to disturb the spectrum analyzer during the

 test interval, since the frequency reference is sensitive to

shock and vibration. The frequency reference should remain within
its attained aging rate if the instrument is left on, the instrument
orientation with respect to the earth’s magnetic field is maintained,
and the instrument does not sustain any mechanical shock. Frequency
changes due to orientation with respect to the earth’s magnetic field
and altitude changes will usually be nullified when the instrument

is returned to its original position. Frequency changes due to
mechanical shock will usually appear as a fixed frequency error.

The frequency reference is also sensitive to temperature changes;
for this reason the ambient temperature near the instrument at the
first measurement time and the ambient temperature at the second
measurement time should not differ by more than 

Placing the spectrum analyzer in STANDBY mode turns the
instrument off while continuing to provide power for the frequency

reference oven, helping to minimize warmup time. However, the
frequency reference must be on to attain its aging rate.

Performance Tests 2-67

Содержание 8568B


























































































































































































































































































































Отзывы:

Нет отзывов