horsch Terrano 4.3 GX, Руководство по эксплуатации

Страница: 98 / 114

9 | Care and maintenance
98 60084498 • 01 • 06/2022 • en
Perform this action on all packer bearings:
1
2
1. Place the inside screw (1), outside screw (2) and bearing into each other.
3 4
2. Slide the conical ring (3) on the outer screw.
3. Screw the conical nut (4) on the inside screw.
5
4. Press the conical nut against the outside screw (5). Do not use a hammer, or
similar!
5. Lubricate the external thread with grease or copper paste.
6. Screw the bearing with the outside screw onto the shaft (tightening torque
370 ± 20 Nm).
7. Tighten the inside screw (tightening torques 180 ± 20 Nm).
8. Pull out the screw if it cannot be tightened and press the conical nut against
the outside screw.