horsch Terrano 4.3 GX, Руководство по эксплуатации

Страница: 79 / 114

Operation | 8
60084498 • 01 • 06/2022 • en 79
Adjusting the working depth
1. Unfold the machine, see Folding section.
2. Operate the control unit and adjust the machine to the desired working depth.
Observe the scale (0–30) at this.
Manual depth setting The aluminium clips for depth setting are plugged on the setting bars. The clips may
only be removed, respectively inserted when the respective side is relieved.
It is therefore required to raise or lower the machine so that either the packer or the
support wheels are loaded or relieved.
NOTE
Access to the hydraulic cylinders without danger
Ø
To reach the hydraulic cylinders on the packer, enter the machine on the side
in the area of the undercarriage. Do not climb onto the machine at this!
3
1
2
Adjustment ranges for mechanical depth setting
1. Use clips in the same quantity and colour on all adjusting rods on support
wheels and packer.
2. Always fill all adjustment areas (1) and (2) completely with clips, if this is pos-
sible.
3. Insert clips not required in area (3).