horsch Terrano 4.3 GX Скачать руководство пользователя страница 75

Страница: 75 / 114

Operation | 8

60084498 • 01 • 06/2022 • en

8.2.3 Parking

DANGER

Serious accidents from loss of stability!

Park the machine only on a level and firm ground.

Staying under unsecured raised machine parts is prohibited.

Carry out work on raised machine parts only if they are mechanically suppor-
ted with suitable means.

Park the machine only on the supports.

When unhitching machines with pneumatic brake the

red

connection (supply

line) must always be disconnected first.

When unhitching machines with pneumatic brake, always press the

red

but-

ton of the brake first to engage the parking brake.

WARNING

Risk of accident due to insufficient stability!

Always close the lock valve on the hydraulic cylinder of the drawbar before
uncoupling!

Park the machine only with empty hopper.

Before unhitching the machine, secure it with the parking brake and/or wheel
chocks against rolling away.

NOTE

Clean the machine and prepare properly before parking it for an extended
period; see chapter

Care and Maintenance.

Содержание Terrano 4.3 GX



















































































































Результаты поиска

Содержание Terrano 4.3 GX

Отзывы:

Бренды по названию

Популярные бренды

horsch Terrano 4.3 GX, Руководство по эксплуатации

Результаты поиска

Содержание Terrano 4.3 GX

Отзывы:

Бренды по названию

Популярные бренды