horsch Terrano 4.3 GX, Руководство по эксплуатации

Страница: 48 / 114

6 | Assembly groups
48 60084498 • 01 • 06/2022 • en
1
2
3
4
1
3
5
Levelling discs with screw adjustment
1 Screw adjustment
(with crank and scale)
2 Cotter pin
3 Crank (folding) 4 Levelling disc
5 Scale
Please note:
Turn the crank always in alternating fashion and uniformly to prevent cocking!
Ø
Pull out the cotter pin and fold up the crank.
Ø Turn the crank down to the desired working depth. Perform the same setting
on all screw adjustments.
Note the value on the scale (at the bottom of the cast fork).
Ø
After the adjustment, fold in the crank handle and secure it with the cotter
pin.
Ø
Check the working results.
Repeat the procedures if necessary and correct the settings until the desired
levelling has been reached.
Adjusting the angle of
attack
With all levelling discs, the angle of attack can be adjusted in three settings.
1
2