manualshive.com logo in svg

horsch Terrano 4.3 GX, Руководство по эксплуатации

Поделиться
Скачать
horsch Terrano 4.3 GX Скачать руководство пользователя страница 46

6 | Assembly groups

46

60084498 • 01 • 06/2022 • en

Heavy steel ring packer with excellent consolidation on heavy, dry soils.
For medium and heavy soils with stones.
Breaks-up and consolidates down to deeper layers.
Very good cutting effect.

SteelFlex Packer

Heavy packer with strip-type consolidation and high mixing effect on heavy, dry
soils. 
Breaks-up and consolidates down to deeper layers. 
Very good self-cleaning due to the natural resonance of the leaf springs.

Double RollPack Packer

Double RollPack Packer

The packer, which is very stable and wear resistant because of its U-section rings,
enables very deep consolidation and excellent levelling, due to the advantageous
flow of soil.

The double roller has the effect of intensive crumbliness and consolidation as well as
a higher load bearing capacity.

Содержание Terrano 4.3 GX



















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды