horsch Terrano 4.3 GX Скачать руководство пользователя страница 24

Страница: 24 / 114

3 | Commissioning

60084498 • 01 • 06/2022 • en

3.3 Installation

Instruction of the operator and initial installation of the machine will be carried out
by our service engineers or distributors.

Any preceding use of the machine is prohibited!

The machine can only be released for operation after the instruction session conduc-
ted by service technicians or sales partners and after the operating instructions have
been read.

WARNING

Increased danger of accidents during commissioning.

Observe the notes in the Safety chapter and familiarise yourself with the ma-
chine!

1. Take loosely delivered parts off the machine.

2. Check all important screw connections.

3. Lubricate all lubrication points.

4. Check the air pressure in all tyres and correct it if necessary.

5. Check all hydraulic connections and hoses for correct fastening and function.

6. Immediately rectify any occurring damage or have it corrected.

Содержание Terrano 4.3 GX



















































































































Результаты поиска

Содержание Terrano 4.3 GX

Отзывы:

Бренды по названию

Популярные бренды

horsch Terrano 4.3 GX, Руководство по эксплуатации

Результаты поиска

Содержание Terrano 4.3 GX

Отзывы:

Бренды по названию

Популярные бренды