manualshive.com logo in svg

horsch Terrano 4.3 GX, Руководство по эксплуатации

Поделиться
Скачать
horsch Terrano 4.3 GX Скачать руководство пользователя страница 57

Optional equipment | 7

60084498 • 01 • 06/2022 • en

57

Connecting the brake

The tractor must always be secured with the parking brake when connecting.

1.

First

 connect the coupling head “Brake” (yellow).

2.

Then

 connect the coupling head "Provision" (red).

Unhitch the brake

The tractor must be secured with the parking brake when unhitching.

1.

First

 disconnect the coupling head "Provision" (red).

2.

Then

 disconnect the coupling head "Brake" (yellow).

The parking brake works with spring accumulator brake cylinders.

1

2

Brake valve

1

Operation of service brake / releasing valve

2

Operation of parking brake

Releasing the brake

1. Press the service brake button (1) up; this releases the service brake.

2. Press the parking brake button (2) up to thus release the parking brake.

NOTE

Ø

Before parking the machine pull the parking brake button down again to ap-
ply the parking brake.

Maintenance

Ø

Drain the air vessel every day during operation.

Air vessel with drain valves

Содержание Terrano 4.3 GX



















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды