horsch Leeb 6 GS Скачать руководство пользователя страница 8

Страница: 8 / 154

Dear Customer,

We would like to thank you for the trust in us,

that you have expressed by buying this machine.

In order to be able to use the trailed crop protec-

tion sprayer to your full advantage, you should

read these operating instructions with utmost

attention before you use the machine.

These operating instructions contain important

information for the proper use and the safe op-

eration of the machine. By purchasing the crop

protection sprayer you have acquired a quality

product from HORSCH LEEB AS.

The trailed crop protection sprayer is a machine

sprayer for the application of crop protection

agents and liquid fertiliser is compliance with

the statutory directives for soil cutures.

The contents is structured in such a way, that

you will be informed in detail about the required

activities in compliance with the work-related

sequence.

The manual provides you with comprehensive

notices and information concerning mainte-

nance, safe use of the machine, safe working

methods, special precautions and available

accessories.

Compliance with these notes and information is

necessary, important and useful for operational

safety, reliability and conservation of value of the

crop protection sprayer.

Please note:

Always keep these operating instructions with

the crop protection sprayer. The operating in-

structions are a component part of your machine.

HORSCH LEEB Application Systems GmbH will

not assume liability for any damage or malfunc-

tions resulting from failure to comply with the

operating instructions.

Upon delivery of the machine check for transport

damage or missing parts! Check the delivered

machine for completeness against the delivery

note, including optional equipment you have

ordered. Only immediately raised claims will

lead to compensation!

Together with the operating instructions, you

also receive an acknowledgement of receipt.

Field service technicians will instruct you in the

operation and maintenance of the machine.

After this you should return the acknowledge-

ment of receipt to HORSCH LEEB AS. This

confirms your formal acceptance of the machine.

The warranty period for the machine starts with

the date of delivery.

Only operate the machine after you have been

instructed and in full compliance with these

operating instructions.This trailed crop protec-

tion sprayer must only be used by persons who

are familiar with the machine and have been

informed about any possible dangers that may

arise from the machine.

Strictly follow the safety instructions! Follow also

the applicable accident prevention regulations

as well as other generally recognised safety,

occupational heath and road traffic related

regulations.

Any information, illustrations and technical

specifications in these operating instructions

are up-to-date at the time of publishing. We, at

any time, reserve the right for design changes,

technical and formal alterations to our products

for the purpose of improvement or to meet

changed legal regulations, without notification.

We will, of course, make up-to-date data avail-

able.

Any directions given in these operating instruc-

tions always refer to the travel direction of the

machine.

If not marked accordingly, all information, illus-

trations and technical data for the variants 6 GS,

7 GS and 8 GS do apply in the same manner.

Содержание Leeb 6 GS



























































































































































Результаты поиска

Содержание Leeb 6 GS

Отзывы:

horsch Leeb 6 GS, Руководство по эксплуатации, Страница: 8 / 154

Результаты поиска

Содержание Leeb 6 GS

Отзывы: