horsch Leeb 6 GS, Руководство по эксплуатации, Страница: 23 / 154

23
1.7.10 Pneumatic brake system
¾
Only start to move the hitched up machine
after the brake pressure required to release
the brake has been reached (pressure gauge
on tractor).
¾
Before coupling the machine clean the seal
rings on the coupling heads of the supply and
brake line from possible dirt!
¾
Close the coupling heads on the tractor before
driving without machine.
¾
Close the coupling heads of supply and brake
lines and hook these into the brackets pro-
vided for this purpose!
¾
Drain the air vessel every day!
¾
The specified settings on the brake valves
must not be changed!
¾
Change the air vessel it it is loose in the ten-
sion straps, if it is damaged, te type plate is
corroded, loose or missing.
1.7.11 Tyres
¾
When working on the tyres make sure that the
machine has been parked safely and properly
secured against rolling away and accidental
lowering (parking brake, wheel chocks).
¾
The assembly of wheels and tyres requires
profound knowledge and the use of proper
assembly tools!
¾
Repair work on tyres and wheels must only be
carried out by specialists and only with the ap-
propriate assembly tools for this kind of work!
¾
Check the air pressure regularly! Pay attention
to the specified air pressure!
¾
Check the wheel nuts regularly and retighten
all fastening screws and nuts as specified by
HORSCH LEEB AS GmbH! Failing to comply
can lead to the wheels coming off and the
machine turning over.