horsch Leeb 6 GS, Руководство по эксплуатации, Страница: 26 / 154

26
1.7.14 Maintenance
¾
Repair, maintenance and cleaning work as
well as the rectification of malfunctions must
generally be carried out with the engine shut
down!
Pull the machine plug off the on-board com -
puter. Pull out the ignition key!
¾
Wear gloves to protect against sharp-edged
machine parts.
¾
Before starting maintenance work clean the
crop protection sprayer, especially all parts
which are contaminated by chemical.
¾
Perform all specified adjustment, mainte-
nance and inspection tasks as scheduled.
¾
Secure all operating media like compressed
air and hydraulic system against unintended
starting up.
¾
Secure the raised machine or raised machine
parts against accidental lowering before start-
ing maintenance, repair and cleaning work!
¾
Safely take up and fasten large assemblies
with lifting gear for replacement.
¾
Check nuts and screws regularly for tight fit
and retighten as necessary!
¾
When exchanging cultivation tools with cutting
edges use appropriate tools and wear gloves!
¾
Dispose of oils, greases and filters according
to applicable regulations!
¾
Prior to working on the electrical system,
disconnect it from the electric power supply!
¾
Disconnect the cable from the generator
and the battery of the tractor before starting
electric welding work on tractor or connected
machines!
The ground connection must be as close as
possible to the welding point.
¾
If protective features are subjected to wear,
they must be inspected at regular intervals
and replaced in due time!
¾
Spare parts must at least meet the technical
requirements specified by the equipment
manufacturer! This is ensured when using
original spare parts from HORSCH LEEB AS!
¾
For the storage of gas use only nitrogen -
danger of explosion!