horsch Leeb 6 GS, Руководство по эксплуатации, Страница: 69 / 154

69
3.26 PTO-shaft pump
(optional)
In case of insufficient hydraulic power of the trac -
tor the PTO-shaft pump can optionally be used.
The pump in this case supports the hydraulic
circuit for spraying.
Installation:
¾
Plug the pump on to the PTO-shaft.
¾
Fasten the anti-twist lock.
For this purpose fix the threaded spindle in the
slot and in the bolt for the upper link without
applying any tension.
PTO-shaft pump on tractor
The pump should not move during operation,
otherwise shaft and bearings may be damaged!
Before switching on the PTO-shaft make
sure that the chosen PTO-shaft speed
of the tractor complies with the permis-
sible speed of the device.
Check all screw connections in regular
intervals.
DANGER
Danger of injuring during assembly
Before performing assembly work shut
down the tractor and pull out the igni-
tion key!
Never switch on the PTO-shaft with the
engine shut down!
Before switching on the PTO-shaft
make sure that there are no persons in
the danger zone of the machine.
Parking position
¾
After parking the machine plug the pump on
the holding plate (a).
a
PTO-shaft pump in parking position
(a) Holding plate
WARNING
Danger of accident when driving in
parking position
Parking position must only be used with
the machine shut down!
For road travel or in the field the pump
should always be mounted to the tractor.
Oil change:
See 9.8.5