www.honeybeecnc.com
4
Dalian
Honeybee
CNC
Equipment
Co.,Ltd.
Tel:
+86
411
85865100
Fax:+86
411
85866100
①
To protect your eyes, always wear a welding helmet or shield. Also always wear safety glasses with
side shields, goggles or other protective eye wear.
②
Replace the protection glasses when the glasses damaged or defiled.
③
Warn the persons who in the workplace, don’t see the strong light or plasma arc without eye
protection .
1.3.3 Skin Protection
①
Wear welding gloves and suitable clothing to protect your skin from the arc rays and sparks.
②
Wear safety gloves, shoes and hamlet.
③
Cover all parts of your body.
④
Wear closemouthed trousers to protect spark and hot slag.
1.3.4 oxic Gases and Fumes
①
Use an air-supplied respirator if ventilation is not adequate to remove all fumes and gases.
②
Don’t cut any materials which contain Cadmium, Antimony, Chromium, Mercury, Arsenic, Cobalt,
Nickel, Barium, Copper, Selenium, etc. If you have to, please wear gas defense mask and related gas
ventilation equipment.
③
Don’t cut any vessel with poisoned substance. If you have to, please clean it and wear gas defense
mask.
1.3.5 Fire and Explosion
①
When doing flame cutting, it will cause explosion if gas released because of gas pipe or connections,
or because of wrong operation. Check all gas connections and gas pipes before start work.
②
The spark and hot slag produced during cutting may cause fire or explosion, too.
③
The cutting workplace must be equipped with fire fighting devices, such as fire extinguisher, sand box
and water, etc.
④
This machine operations have to be performed by a well trained operator.
⑤
The flammable and explosive material must be kept over 10meters away from the cutting machine.
⑥
Never cut any flammable and explosive vessels, never cut in flammable and explosive circumstance,
never cut pressure vessels or other close-in vessels.
⑦
When use underwater or semi-dry work table for cutting aluminum, hydrogen will be produced and
stored in the work table and may cause hydrogen explosion, must equip exhaust pipe device.
1.3.6 Gas Regulation Valve
①
Don’t use bad quality and easy damaged gas regulation valve, it will hurt operator.
②
Don’t use gas-released regulation valve.
③
Don’t use oil to lubricate gas regulation valve.
1.3.7 Gas Tank
①
Don’t use gas-released or damaged gas tanks.
②
Don’t put the gas tanks upside down or unsafe.
③
Don’t remove or transport gas tanks without safe valve.
④
Don’t use oil to lubricate gas tanks.
⑤
Don’t use hammer or other tools to beat or open the gas tanks.
1.3.8 Gas Pipe
①
Honeybee use universal standard pipes, the oxygen pipe is blue, gas pipe is red. Never mix them.
②
If gas pipe is aging, or damaged and burned, replace it at once no matter it is gas released or not.
③
Gas pipes knot tied are forbidden.
④
Check gas pipes, pipes connections to see if loosed or gas released before work.
