www.honeybeecnc.com
21
Dalian
Honeybee
CNC
Equipment
Co.,Ltd.
Tel:
+86
411
85865100
Fax:+86
411
85866100
5.3 Auto Mode Function Description
Under main menu, press
【
F1
】
into AUTO function, as picture 20.
Pic. 20 Plasma Cutting Mode
5.3.1 Speed
In automatic mode, at the top left corner of the screen, it shows F×(multiplying factor of automatic
machining speed)= set machining speed.
In manual mode, at the top left corner of the screen, it shows F×(multiplying factor of manual
speed)=manual speed.
SPEED
indicates the actual speed while the active speed multiplying factor is adjustable with [F
↑
] and
[F
↓
].
It is allowed to adjust the speed quickly by pressing [F] key in this window. A pull-down menu will appear
with 8 speed multiplying factors available for selection with [
↑
] and/or [
↓
] key: 5%, 20%, 30%, 40%, 50%,
60%, 80% and 100%. And then, press ENTER key to acknowledge the selection.
Attention:
The speed may be indicated in Metric or English system depending on the Metric/English
Selection in SETUP (Refer to Parameter Control).
5.3.2 Program, Pierce and Kerf
They are used to indicate the name of machining program, serial number of pierced hole(automatic clear
in automatic machining mode) and the active compensating width of kerf respectively.
5.3.3 Work Mode, Operate
Work Mode
field indicates the active operating mode such as rotation selection, breakpoint recovery,
mirroring and section selection.
Operate field
indicates such information as machining/pause, limit alarms and time delay.
5.3.4Input and output
Below the heavy-current switches, there are 3 rows × 8 indicators
○
.
The top indicators show the status of 13 input ports,
○
indicating no signal input and
●
indicating signal
input.
Heavy-current control
output
Function keys
Input/output
indication
Machining
parameter
indication
Work mode
Active speed
multiplying factor
Program name
Shape
Display
Space
Coordinates
