www.honeybeecnc.com
25
Dalian
Honeybee
CNC
Equipment
Co.,Ltd.
Tel:
+86
411
85865100
Fax:+86
411
85866100
Control the cutting torch and let it move along the baseline to the end point. The larger distance between
the beginning point and the end point, the more accurate of the measurement. Aim the cutting torch at
the baseline and press [F3] to set the end point of measurement.
At this moment, the rotation angle of the datum line is calculated. After the rotate function is fulfiled, the
rotation angle will appear in the OPERATE field, as shown in Fig. 3.2 below.
5.4.10
【
F4
】
MIRR
It is possible to select
X Mirror
,
Y Mirror
and
No Mirror
if press [F4] key continually.
When X Mirror is selected, the machining program will run along the symmetry direction of X-axis, as
appears inverted horizontally.
When Y Mirror is selected, the machining program will run along the symmetry direction of Y-axis, as
appears inverted vertically. When default No Mirror is selected, the machining program will run normally.
5.4.11
【
F5
】
SCALE
The system will remind user to input scale if this key is pressed. When the machining program is
executed, the work size will magnify or minify as per this scale. This feature is very useful in cutting
graphic character.
5.4.12
【
F6
】
NEST
Single program file can be arranged and nest here.
System remind you to input:
Range Line: Line number of Y direction.
Range Column: Column number of X direction.
Line distance: parts distance of X direction.
Column distance: parts distance of Y direction.
Line offset: Right offset distance when even lines.
Pic. 24
Notice: This machine has not function of reset (back to mechanic original point).
5.5 Start of Automatic Mode
5.5.1Machining Speed
Automatic multiplying factor is used to adjust machining speed.
Machining Speed
＝
machining speed limit * machining multiplying factor
, where the automatic
multiplying factor is adjustable with [F], [F
↑
] and [F
↓
] key.
列间隔
行偏移量
行间隔
