www.honeybeecnc.com
36
Dalian
Honeybee
CNC
Equipment
Co.,Ltd.
Tel:
+86
411
85865100
Fax:+86
411
85866100
Chapter 7 SETUP(Parameter Setting)
In the system main menu, press [F4] to enter parameter setting window as shown below:
Pic.39 SETUP main menu
Parameter Description
Speed parameters
Starting speeds of every axis, adjustment time and maximum speed limit.
System parameters
Gear ratio, mechanical origin point , reference point, reverse backlash, line bias and soft positive /
negative limit switch in every axis
Flame cutting parameters
Ignition delay, preheating delay, torch lifting/lowering delay, lifting/lowering of piercing torch, piercing
delay, etc.
Plasma parameters
Torch positioning delay, M commands for arc start, M commands for arc breaking, arc voltage test option,
positioning test option and piercing delay.
Control parameters
Flame/plasma mode selection, machining speed limit, MOVE HOLE option, metric/English selection, etc.
Save
Save the modified parameters into parameters space.
Continuous pressing
S
key, optional external manual control key and manual enable/disable option.
Notice:
Whenever change the above parameters, only press
【
F7
】
can save the changes.
System parameters is prohibited to be changed, if change, it will influence machine running
quality.
If the parameters cannot be showed in one page, press
↑
↓
to check.
SETUP main menu
ESC key
