Hofmann monty UNIVERSAL 2, Руководство по эксплуатации

Страница: 70 / 92

70
Maintenance
Operator’s Manual monty universal 2
6.0-5
T
G
S
F
R
Figure 6.0-5
• Drain the water from the filter ‘ F ’ by pulling the fitting
‘ S ’ downwards
• Check the level of oil in the lubricator.
Oil top-up procedure in the lubricator:
• Detach the compressed air line.
• Remove the cup ‘ T ’ by rotating it.
• Add oil as required.
• Make sure that the gaskets are in position before
re-closing the cup.
USE ONLY OILS FOR AIR DEVICES, DO NOT USE
BRAKE FLUID OR OTHER NON RECOMMEND
LUBRICANTS.
Suggested oils for the filter/lubricator unit:
TAMOIL
: WHITE MINERAL OIL 15
SHELL : ONDINA OIL 15
BP : ENERGOL WT3
TOTAL : LOBELIA SB 15
ESSO : MARCOL 82
If the machine is equipped with a tank for tubeless tires.
• drain condensation from the tank.
Note : The indicated frequency for the illustrated
tasks is suitable for normal machine use.
It is recommended that you run checks
and carry out unscheduled maintenance
every time it is deemed necessary or more
frequently than the indicated schedule.
6.1 Storage
In case the machine is not to be used for a long period
of time (6 months or more) it is necessary to disconnect
all power sources, discharge the bead seater tank (for
models fitted with the GT System), protect all parts
that may be damaged, protect the air hoses that may
be damaged by the drying process.
When putting the machine back in operation, check
first the condition of all previously protected parts, and
check for correct functioning of all devices before using
the machine again.