Hofmann monty UNIVERSAL 2, Руководство по эксплуатации

Страница: 68 / 92

68
Maintenance
Operator’s Manual monty universal 2
6.0-4
6.0-5
2
1
3
6.0-3
T
G
S
F
R
1
3
4
2
carry out:
• Clean with a dry cloth
• Restore a thin film of protective oil
on the parts:
Figure 6.0-4
1) Wheel clamping hub nut
2) Vertical slide cylinder of tool
3) Pneumatic cylinder rods
Figure 6.0-5
• Check that the lubrication unit is working
properly.
One oil drop falling into the transparent cone
G every 4-
5 complete strokes of the bead breaker indicates that
the correct amount of oil is being dispersed in the system.
If necessary,
•
Adjust the unit using the screw ‘ R ’ to correct the
oil flow so it is as indicated above.
Every day ,
carry out:
• Clean with a dry cloth
on the parts:
Figure 6.0-3
1) Plastic guards for wheel clamping tapers
2) Mount/demount tool plastic guards
3) Bead breaker disc
4) Plastic guards of Wheel turntable.