78
17.1 Messages
Messages Reason Solution
No basic unit identified
- Basic unit not connected to control - Check cable connection.
unit
No piston fitted
- Basic unit was assembly without
- Dismantle basic unit and fit piston
piston
again.
Special cleaning position case:
If the basic unit is in cleaning position, mounting can be facilitated by moving the spindle slowly to the lower stop by
pressing the “Move“ button in the message on the control unit for a longer period of time. If the spindle is already at the
lowest point, pressing the button for a longer period will move it slightly upwards again.
Содержание Opus Dispenser
Страница 93: ...93 Notizen Notes ...
Страница 94: ...94 Notizen Notes ...