Hioki RM3542-50, Инструкция по эксплуатации

Страница: 24 / 234

1.3 Screen Organization
18
Normal display (measurement screen)
This screen normally appears while measuring. View
currently measurement values and measurement
conditions.
Some parts of the display depend on the comparator
mode and other settings.
Measurement
value
Settings Menu (corresponding to the F keys)
Displayed contents depend on the current function settings.
Parentheses ( ) indicate the corresponding F key.
MENU (F1) Displays the Basic Settings screen.
PRINT (F2) Printing (p. 91)
Appears only when the interface is set
for the printer.
STAT (F3) Statistical calculation results (p. 84)
Appears only when statistical calcula-
tion is enabled
NUMBER (F4) Sets the Auto-Memory number (p. 81).
Appears only when the auto-memory
function is enabled
Displays the memory number, the num-
ber of passed and failed products, in
the lower left of the screen.
UNDO (F3) Deletes the previously stored measure-
ment and calculation result
(executes only once) (p. 86)
Appears only when the calculation re-
sult screen is displayed.
ALLCLR (F4) Clears all memory and calculations (p.
86).
Appears only when calculation results
are displayed.
LOCAL (F1) Cancels the remote status (p. 116).
UNLOCK (F1) Cancels the key-lock status (Hold for
one second) (p. 68).
Criteria Setting Values (p. 36)
Displayed contents depend on the
selected comparator mode.
(Ex.: REF% mode)
To display the Basic Settings screen
Measurement Conditions
Shows current setting contents. Displayed contents depend on
the current settings.
INT/ EXT Trigger source type (p. 31)
Ω
Measurement ranges (p. 32)
FAST/ MED/ SLOW Measurement Speed (p. 29)
0ADJ /
OFF (no display)
Appears only when the zero-ad-
justment is enabled (p. 34).
OVC /
OFF (no display)
(OVC: offset voltage compensation)
Appears only when the offset voltage
compensation is enabled (p. 65).
LP /
OFF (no display)
Appears only when the low-power
resistance measurement function
is enabled (p. 28).
S / OFF (no display) Appears when scaling function is
enabled (p. 46)
NUM Appears only when numeric input is
enabled.
RMT Remote status(p. 116)
M.LOCK Disables all operations except the
comparator settings (p. 67).
F.LOCK Disables all operations including
the comparator settings (p. 67)
Basic Settings screen
Make basic measurement condition settings on this screen.
Measurement speed and range can be changed while
viewing the measurement values (when the Trigger
source is set to the internal trigger [INT]).
TRG
Changing the trigger source (start control
method) (p. 31).
When selecting [TRG: EXT], [MANU] appears by
pressing the F4 key (Measures manually once).
RANGE Change the range (p. 32).
SPEED Change the measurement speed (p. 29).
0ADJ Zero-adjustment function ON/OFF (p. 34)
COMP Comparator function ON/OFF(p. 36)
LOCK Key-lock function ON/OFF (p. 67)
Measurement condition
settings
Move with cursor keys.
Measurement condition
setting conditions
Return to previous screen
To the Measurement Settings screen [MEAS SETTINGS]
To the Data Memory Setting screen [DATA SETTINGS]
To the System screen [SYSTEM]
MISC To display the Detailed Settings screen.