Hioki RM3542-50, Инструкция по эксплуатации

Страница: 144 / 234

9.7 Message Reference
138
Write and Read the Service Request Enable Register (SRER)
Syntax Command
∗
SRE
<0 to 255 (NR1)>
Query
Response
∗
SRE?
<0 to 255 (NR1)>
Description Command The SRER mask is set to the numerical value 0 to 255. Although NRf
numerical values are accepted, values to the right of the decimal are rounded
to the nearest integer.
Bit 6 and unused bits 2, 3 and 7 are ignored.
The data is initialized to zero at power-on.
Query The contents of the SRER, as set by the
∗
SRE
command, are returned as an
NR1 value (0 to 255). Bit 6 and unused bits 2, 3 and 7 are always returned as
zero.
Example ∗
SRE 33
Set SRER bits 0 and 5 to 1.
∗
SRE?
33
SRER bits 0 and 5 have been set to 1.
128 64 32 16 8 4 2 1
bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0
unused 0 ESB MAV unused unused ESE1 ESE0
Read the Status Byte and MSS Bit
Syntax
Query
Response
∗
STB?
<0 to 255 (NR1)>
Description The contents of the STB are returned as an NR1 value (0 to 255).
The response message has no header.
Example ∗
STB?
16
STB bit 4 has been set to 1.
128 64 32 16 8 4 2 1
bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0
unused MSS ESB MAV unused unused ESE1 ESE0
Request a Sample
Syntax Command
∗
TRG
Description Performs one measurement when external triggering is enabled.
When Statistical Calculation is ON, calculation data is exported.
When the memory function is ON, the measurement value is stored.
Example
:TRIGger:SOURce EXTernal;
∗
TRG
Note When an error occurs with the Settings Monitor function enabled, triggering is disabled
(p. 59).