Hioki 8847 Скачать руководство пользователя страница 95

Страница: 95 / 372

5.5 Managing Files

Chap

ter
5
Sav

ing
/Loadi

Dat

a &

Managi

ng Fi

les

Sort files in the file list into a specified order.

Rename a file or folder.

5.5.5 Sorting Files

Procedure

To open the screen: Press the

FILE

key

→

File screen

To change the media: (



p.66)

Select

[Sort]

, and select

[Type]

Folders/files are sorted by specified item.

Move the cursor to the

[Order]

Select

Folders/files are sorted in specified order.

Select

[OK]

The sort screen closes.

Off

No sorting.

Name

Sorts files by file name characters.

Type

Sorts files by type (file format) of data (settings, MEM

waveforms, etc.)

Date

Sorts files by time and date of creation.

Size

Sorts files by size.

Ascending order A

→

, Old

→

New, Small

→

Large

Descending order Reverse sort order

Select

The order format will be displayed in the file list (with



: Ascending order



Descending order mark) and marked by the GUI.
When there are both files and folders, folders are listed at the top and files at the
bottom.

5.5.6 Renaming Files & Folders

Procedure

To open the screen: Press the

FILE

key

→

File screen

To change the media: (



p.66)

Select the file or folder you want to rename.

Select

[Rename]

Select

[Enter Char]

, and enter

[Save Name]

See:

"8.1 Adding Comments" (



p.118)

Select

[Exec]

The file or folder is renamed.

To cancel renaming:
Select

[Cancel]

Select

Содержание 8847





















































































































































































































































































































































































Результаты поиска

Содержание 8847

Отзывы:

Похожие инструкции для 8847

Бренды по названию

Популярные бренды

Hioki 8847, Инструкция по эксплуатации

Результаты поиска

Содержание 8847

Отзывы:

Похожие инструкции для 8847

Бренды по названию

Популярные бренды