hilscher NANL-B500G-RE, Руководство пользователя

Страница: 83 / 90

Technical data 83/90
12 Technical data
12.1 Analyzer device NANL-B500G-RE
NANL-B500G-RE Parameters Value
Part Name NANL-B500G-RE
Part no. 7.313.100
Description netANALYZER portable device with Gigabit Ethernet PC
interface for Real-Time Ethernet and all 10/100BASE-T
Ethernet networks (stand-alone device).
Function Passive Ethernet analyzer for Real-time Ethernet systems;
analyzes data traffic in a communication link and logs the
incoming Ethernet frames. In addition, events of four digital
inputs can be recorded.
Interactive operating mode, Autonomous operating mode
(see section
Autonomous operating mode, general
conditions and requirements [
}
page 39]).
Communication
controller Type netX 500 processor with ARM 926 CPU
Integrated memory Size of the dual-port memory 64 KByte
System interface PC interface Gigabit Ethernet RJ45 socket to the PC
Required connector
(at the reverse side of the device) "UPLINK 1Gb/s": Ethernet RJ45 socket (1 port)
Ethernet
communication Ethernet communication Receipt of Ethernet frames
Ethernet frame types Ethernet II
Ethernet interface (at
the front side of the
device) Transmission rate 10 MBit/s, 100 MBit/s
Interface type 100 BASE-TX, 10 BASE-T
Galvanic isolation isolated
Isolation voltage 1000 VDC (tested for 70 seconds)
Half duplex/full duplex supported
Connector 4* RJ45 Socket, refer also to section Ethernet
interface [ } page 80].
Ethernet cable 2 x 2 Twisted-pair cupric cable, CAT5 (100 MBit/s),
length of cable max. 100 m
Channels / ports 2 communication channels with integrated TAP (TAP B,
TAP A), and each with two ports for capturing data in both
directions (together 4 Ports: Port 0 to Port 3)
Filters 2 filters on the first 512 bytes of the Ethernet frames
(Source and destination MAC address, Ether-type and 498
following bytes)
Time stamp resolution 10 ns
Delay time network interface Delay TAP < 1 ns Signal dealy
netANALYZER device NANL-B500G-RE | Installation, operation and hardware description
DOC091110UM26EN | Revision 26 | English | 2019-07 | Released | Public © Hilscher 2007-2019