hilscher NANL-B500G-RE, Руководство пользователя

Страница: 46 / 90

Commissioning 46/90
7.4.6 Set maximum number of snapshots for autonomous operating mode
For data recording in autonomous mode in snapshot mode, you can specify
the maximum number of snapshots to be stored on the connected USB
memory device.
Important:
Avoid overflow of the USB memory by using a USB memory device
with sufficient memory reserve for your application or by setting a
correspondingly lower maximum number of snapshots. See also
section
Estimate required USB memory capacity for snapshot mode
theoretically [
}
page 44].
To set the maximum number of snapshots from a web browser, follow the
steps below.
Ø
Enter the IP address of the analyzer device NANL-B500G-RE (e.g.
192.168.1.1.) into the address line of the browser.
Ê
The web page netANALYZER configuration appears.
netANALYZER device NANL-B500G-RE | Installation, operation and hardware description
DOC091110UM26EN | Revision 26 | English | 2019-07 | Released | Public © Hilscher 2007-2019