HBM PX401, Руководство по эксплуатации

Страница: 486 / 552

PMX command set (API)
486
A4354-2.2 HBM: public
PMX
S
Some commands may be optional, because they only
select the default. If the default has not been changed
before, they can be omitted:
pcs 0 sps 0 mss 214
S
The default of the recording mask (if never set before)
is: all equipped channels (except time channel), all
their subchannels, and signal “gross” for all of them.
S
A value line is also called a value page . It is a set of
values defined by the measurement rate group config­
uration. For the above example, this means, the lines
have the size of two float values for each measure­
ment group, because we have put two subchannels
(each has one active signal) into a group. A float value
consists of 4 bytes. Therefore the measurement val­
ues will arrive as a multiple of 2 float values
(size(line)=2) or 8 bytes, respectively
S
In the above example selections via pcs and sps are
done twice. That can be packed:
pcs 1 (x) sps 3,4 (x) mrg 0 (x)
pcs 2 (x) sps 1,2 (x) mrg 1 (x)
icr 6320,0 (x)
icr 6319,1 (x)
pcs 1 (x) sms 3,4 (x) sps 3,4 (x) mss 214 (x)
pcs 2 (x) sms 1,2 (x) sps 1,2 (x) mss 214 (x)
This is identical with:
pcs 1 (x) sms 3,4 (x) sps 3,4 (x) mss 214 (x) mrg 0 (x)
pcs 2 (x) sms 1,2 (x) sps 1,2 (x) mss 214 (x) mrg 1 (x)
icr 6320,0 (x)
icr 6319,1 (x)