HBM PX401, Руководство по эксплуатации

Страница: 38 / 552

Model overview, scope of supply, accessories
38
A4354-2.2 HBM: public
PMX
PMX supports up to three sampling rates that can be
independently set. These sampling rates can then be
assigned individual measurement signals.
Times of day, digital inputs/outputs of the PMX or
triggering via limit values can be used to start/stop
(trigger) a measurement.
The PMX can also be partially parameterized with
catman
® . This includes:
S
Setting the sensor type via the sensor database or
TEDS
S
Writing the TEDS sensors via the integrated TEDS
EDITOR in catman
®
S
Zero setting the measurement signal and setting the
filter frequency for each individual channel
You can use the catman
®
Script programming language
to program complete measurement sequences including
automated storage of measured data and creation of
logs.
For more information, see the online Help in
catman
® EASY/AP
Important
The PMX device settings are permanently saved in the
active PMX parameter set by catman
®
. The sensor set­
tings (sensor type, scaling and filter) are automatically
changed by catman
®
in PMX. This cannot be locked
either in catman
®
or in PMX.
Before starting catman
®
activate retaining of the PMX
filter setting in the catman
®
option dialog (under DAQ
channels: "Allow manual filter settings").
For firmware version 2.00 and later, catman
®
­version 4.0
or higher is mandatory.