HBM PX401, Руководство по эксплуатации

Страница: 275 / 552

Parameter sets (measurement programs)
PMX
A4354-2.2 HBM: public
275
Example:
The table shows the parameter set - sub-parameter set
allocation:
Parameter set Sensor Measured
value
acquisition
Limit values Digital
outputs
000
Factory settings
Default Default Default Default
001
Workpiece A
Default Fast filter Limit values
Workpiece A
ignore
002
Workpiece B
Default Slow filter Limit values
Workpiece B
ignore
Switching from parameter set 000 to 001 causes the
following:
Sensor
Default -> Default
No change, but after switching the "Sensor
Default" settings are guaranteed to be
present
Acquisition of measured values
Default -> "Fast filter"
The settings in "Fast filter" become active
Limit values
Default -> "Limit values Workpiece A"
The settings in "Limit values Workpiece A"
become active
Digital outputs
Default -> ignore
No change, the "Digital outputs" settings
remain as they are, they are dependent on
the prior history