HBM PX401, Руководство по эксплуатации

Страница: 423 / 552

PMX command set (API)
PMX
A4354-2.2 HBM: public
423
Measuring Buffer Format Query
Output the output format
Syntax: MBF? p1(x)
Parameters: p1: Sample rate group 0,..,2
Response: q1(y)
q1: Output format
If parameter p1 is omitted, you are given the output
format of Sample rate group 0.
Read Measuring Buffer Query
This command is used to output the measured values
recorded in system memory.
The character string "#0" (2 bytes) is placed before the
measured values for output (only in the first line); this can
then be followed by as many values as are available, or
as have been requested. Each value is 4 bytes in size,
and the value format is "float".
If more measured values were requested than are
currently available, the output routine remains on
standby, until more measured values come in. CR LF is
output once, as the terminating character after the last
line. The output format is defined with the aid of the MBF
command. As this is always followed by an output, even if
less measured values than requested are present, you
should always use the OMP? command before using the
RMB? command, to discover how many lines of
measured values are present.
Syntax: RMB? p1,p2,p3(x)
MBF?
RMB?