HBM PX401, Руководство по эксплуатации

Страница: 472 / 552

PMX command set (API)
472
A4354-2.2 HBM: public
PMX
bus ­ bits (p6) will be used to define the state of a digital
output .
p6: binary mask for the fieldbus
­
bits which is ANDed with
the 32 fieldbus
­
bits. If result is >
0
(true) this digital output
will be set. A mask with more than one bit set is possible
too
.
Value range: 0,1,2,3...(2^32­1)
p7: enable for digital inputs (ON=1
,
OFF=
0
)
.
If enabled
the status of the 16 digital inputs with the mask for the
digital inputs (p8) will be used to define the state of a di­
gital output.
p8: binary mask for the digital inputs which is ANDed with
the 16 digital inputs. If result is >
0 (true) this digital output
will be set
.
A mask with more than one bit set is possible
too
.
Value range: 0,1,2,3...(2^16­1)
p9: enable for parameter ­ set ­ number (ON=1 , OFF= 0 ) . If
enabled the parameter­set ­ number with the mask for the
parameter­set ­ number (p10) will be used to define the
state of a digital output.
p10: binary mask for the parameter
­
set
­
number which is
ANDed with the currently active parameter­set
­
number
.
If
result is >
0
(true) this digital output will be set. A mask
with more than one bit set is possible too . Value range:
0, 1 , 2 , 3 ... (2^32 ­ 1)
p11: enable for calculated
­
channel
­
bits (ON=1
,
OFF=
0
)
.
If
enabled the status of the 32 bit word which can be
defined by one or more calculated
­
channel(s) in combina­
tion with the mask for the calculated­ channels (p12) will
be used to define the state of a digital output.
p12: binary mask for the calculated
­
channels which is
ANDed with the 32 calculated
­
channel
­
bits. If result is >
0
(true) this digital output will be set. A mask with more
than one bit set is possible too
.
Value range:
0,
1
,
2
,
3
...
(2^32
­
1)