Harris Platinum Z2 CD, Руководство пользователя

Страница: 138 / 196

5-8 888-2406-002
WARNING: Disconnect primary power prior to servicing.
Maintenance and Alignment
5.8 Setting Maximum Power Limits
There is a maximum power limit which can be set for each of the transmitter power
settings, LOW and HIGH. The “MAX HIGH SET” sets the maximum power output
when the transmitter is on HIGH power. The “MAX LOW SET” sets the maximum
power output when the transmitter is on LOW power.
The MAX HIGH Power limit is set as follows:
STEP 1
Turn the transmitter on at HIGH power and set the power output to a
power level which is less than the desired maximum power using the
Raise and Lower buttons.
STEP 2
To enter a new MAX HIGH setting go to the MAX HIGH SET
screen, [HOME, MORE, CONFIGURATION B,B] change to the
new maximum power level and press [BACK] to save the changes.
STEP 3
Press Raise to make sure the power level will not go above the new
MAX HIGH setting. The MAX HIGH setting in Step 2 can be
adjusted slightly to get the exact desired power level.
The MAX LOW Power limit is set as follows:
STEP 1
Turn the transmitter on at LOW power and set the power output to a
power level which is less than the desired maximum power using the
Raise and Lower buttons.
STEP 2
To enter a new MAX LOW setting go to the MAX LOW SET screen,
[HOME, MORE, CONFIGURATION B,C] change to the new
maximum LOW power level and press [BACK] to save the changes.
STEP 3
Press Raise to make sure the power level will not go above the new
MAX LOW setting. The MAX LOW setting in Step 2 can be
adjusted slightly to get the exact desired power level.