H3C S5120-EI Series, Руководство по эксплуатации

Страница: 983 / 1191

1-2
Follow these steps to enable the HTTP service:
To do… Use the command… Remarks
Enter system view
system-view
—
Enable the HTTP service
ip http enable
Required
Enabled by default.
Configuring the Port Number of the HTTP Service
Configuration of the port number of the HTTP service can reduce the attacks from illegal users on the
HTTP service.
Follow these steps to configure the port number of the HTTP service:
To do… Use the command… Remarks
Enter system view
system-view
—
Configure the port number of the
HTTP service
ip http port port-number
Required
By default, the port number of the
HTTP service is 80.
If you execute the
ip http port
command for multiple times, the last configured port number is used.
Associating the HTTP Service with an ACL
By associating the HTTP service with an ACL, only the clients that pass ACL filtering are allowed to
access the device.
Follow these steps to associate the HTTP service with an ACL:
To do… Use the command… Remarks
Enters system view
system-view
—
Associate the HTTP service with
an ACL
ip http acl acl-number
Required
The HTTP service is not
associated with an ACL by default.
z
If you execute the
ip http acl
command for multiple times to associate the HTTP with different
ACLs, the HTTP service is only associated with the last specified ACL.
z
For the detailed introduction to ACL, refer to
ACL Configuration
in the
Security Volume
.