H3C S5120-EI Series, Руководство по эксплуатации

Страница: 883 / 1191

3-11
To do… Use the command… Remarks
Enable command authorization
command authorization
Required
Disabled by default, that is,
users can execute commands
without authorization.
Configuring Command Accounting
Command accounting allows the HWTACACS server to record all commands executed on the device
regardless of the command execution result. This helps control and monitor the user operations on the
device.
If command accounting is enabled and command authorization is not enabled, every executed
command will be recorded on the HWTACACS server. If both command accounting and command
authorization are enabled, only the authorized and executed commands will be recorded on the
HWTACACS server.
The command accounting configuration involves three steps:
1) Enable command accounting. See the following table for details.
2) Configure a HWTACACS scheme. Specify the IP addresses of the HWTACACS accounting
servers and other related parameters. For details, refer to the section Configuring HWTACACS of
AAA Configuration
in the
Security Volume
.
3) Configure the ISP domain to use the HWTACACS scheme for command line users. For details,
refer to the section
Configuring AAA Accounting Methods for an ISP Domain
of
AAA Configuration
in the
Security Volume
.
Follow these steps to enable command accounting:
To do… Use the command… Remarks
Enter system view
system-view
––
Enter AUX user interface view
user-interface vty first
-
number
[
last-number
]
––
Enable command accounting
command accounting
Required
Disabled by default, that is, the
accounting server does not
record the commands the users
execute.