H3C S5120-EI Series, Руководство по эксплуатации

Страница: 553 / 1191

1-39
This example assumes that the RADIUS server runs iMC PLAT 3.20-R2602 or iMC UAM 3.60-E6102.
# Add an access device.
Log into the iMC management platform, select the
Service
tab, and select
Access Service
>
Access
Device
from the navigation tree to enter the
Access Device
page. Then, click
Add
to enter the
Add
Access Device
window and perform the following configurations:
z
Set both the shared keys for authentication and accounting packets to
expert
z
Specify the ports for authentication and accounting as 1812 and 1813 respectively
z
Select
Device Management Service
as the service type
z
Select
H3C
as the access device type
z
Select the access device from the device list or manually add the device with the IP address of
10.1.1.2
z
Click
OK
to finish the operation
Figure 1-10
Add an access device
# Add a user for device management
Log into the iMC management platform, select the
User
tab, and select
Access User View
>
Device
Mgmt User
from the navigation tree to enter the
Device Management User
page. Then, click
Add
to
enter the
Add Device Management User
window and perform the following configurations:
z
Add a user named
hello@bbb
and specify the password
z
Select
SSH
as the service type
z
Specify the IP address range of the hosts to be managed as 192.168.1.0 to 192.168.1.255, and
click
Add
to finish the operation