H3C S5120-EI Series, Руководство по эксплуатации

Страница: 470 / 1191

3-5
To do… Use the command… Remarks
Trust the
port priority
undo qos trust
Display the priority trust
mode configuration on
the port
display qos trust interface
[
interface-type interface-number
]
Optional
Available in any view
Configuring the Port Priority of a Port
You can change the port priority of a port used for priority mapping. For the priority mapping procedure,
see
Figure 3-1 .
Follow these steps to configure the port priority of a port for priority mapping:
To do… Use the command… Remarks
Enter system view
system-view
—
Enter
interface
view
interface interface-type
interface-number
Enter
interface
view or port
group view Enter port
group view
port-group manual
port-group-name
Use either command
Settings in interface view take effect
on the current interface; settings in
port group view take effect on all
ports in the port group.
Configure the port priority
qos priority priority-value
Required
The default port priority is 0.
Display the trusted packet
priority type and the
priorities of an interface
display qos trust interface
[
interface-type
interface-number
]
Optional
Available in any view
Displaying and Maintaining Priority Mapping
To do… Use the command… Remarks
Display priority mapping table
configuration
display qos map-table
[
dot1p-dp
|
dot1p-lp
|
dscp-dot1p
|
dscp-dp
|
dscp-dscp
]
Available in any view
Display the trusted packet
priority type on a port
display qos trust interface
[
interface-type
interface-number
]
Available in any view
Priority Mapping Configuration Examples
Priority Mapping Table and Priority Marking Configuration Example