H3C S5120-EI Series, Руководство по эксплуатации

Страница: 1174 / 1191

1-12
...
%Created dir flash:/test.
<Master> dir
Directory of flash:/
0 -rw- 10105088 Apr 26 2000 13:44:57 test.bin
1 -rw- 2445 Apr 26 2000 15:18:19 config.cfg
2 drw- - Jul 14 2008 15:20:35 test
30861 KB total (20961 KB free)
2) To create and access the
test
folder under the root directory of the flash on IRF member slave 3,
perform the following steps:
<Master> mkdir slot3#flash:/test
%Created dir slot3#flash:/test.
<Master> cd slot3#flash:/test
<Master> pwd
slot3#flash:/test
Or:
<Master> cd slot3#flash:/
<Master> mkdir test
%Created dir slot3#flash:/test.
3) To copy the
test.bin
file on the master to the root directory of the flash on IRF member slave 3,
perform the following steps:
<Master> pwd
slot3#flash:
//The above information indicates that the current working path is the root directory of the flash on slave
3.
<Master> cd flash:/
<Master> pwd
flash:
// The above operations indicate that the current working path is the root directory of the flash on the
master.
<Master> copy test.bin slot3#flash:/
Copy flash:/test.bin to slot3#flash:/test.bin?[Y/N]:y
%Copy file flash:/test.bin to slot3#flash:/test.bin...Done.
Configuration file management
1) Configuration file synchronization
IRF uses a strict configuration file synchronization mechanism to ensure that devices in an IRF can
work as a single device on the network, and to ensure that after the master fails, the other devices can
operate normally.
z
When a slave starts up, it automatically finds out the master, synchronizes the master's
configuration file, and executes the configuration file; if all devices in an IRF start up simultaneously,
the slaves synchronize the master's initial configuration file and execute it.
z
When the IRF operates normally, all your configurations will be recorded into the current
configuration file of the master, and are synchronized to each device in the IRF; when you save the
current configuration file of the master as the initial configuration file by using the
save
command,