H3C S5120-EI Series, Руководство по эксплуатации

Страница: 954 / 1191

1-12
Configuring parameters for saving the current running configuration
Before the current running configuration is saved manually or automatically, the file path and filename
prefix must be configured. After that, the system saves the current running configuration with the
specified filename (filename prefix_serial number.cfg) to the specified path. The filename of a saved
configuration file is like
20080620archive_1.cfg
, or
20080620archive_2.cfg
. The saved configuration
files are numbered automatically, from 1 to 1,000 (with increment of 1). If the serial number reaches
1,000, it restarts from 1. If you change the path or filename prefix, or reboot the device, the saved file
serial number restarts from 1, and the system recounts the saved configuration files. If you change the
path of the saved configuration files, the files in the original path become common configuration files,
and are not processed as saved configuration files.
The number of saved configuration files has an upper limit. After the maximum number of files is saved,
the system deletes the oldest files when the next configuration file is saved.
Follow these steps to configure parameters for saving the current running configuration:
To do… Use the command… Remarks
Enter system view
system-view
—
Configure the path and
filename prefix of a saved
configuration file
archive configuration
location directory
filename-prefix
filename-prefix
Required
By default, the path and
filename of the saved
configuration file are not
configured, and the system
does not save the configuration
file at a specified interval.
Set the maximum number of
configuration files that can be
saved
archive configuration max
file-number
Optional
The default number is 5.