H3C S5120-EI Series, Руководство по эксплуатации

Страница: 548 / 1191

1-34
To do… Use the command… Remarks
Specify the unit for data flows or
packets to be sent to a
HWTACACS server
data-flow-format
{
data
{
byte
|
giga-byte
|
kilo-byte
|
mega-byte
} |
packet
{
giga-packet
|
kilo-packet
|
mega-packet
|
one-packet
} }
*
Optional
The defaults are as follows:
byte
for data flows, and
one-packet
for data packets.
In HWTACACS
scheme view
nas-ip ip-address
quit
Set the source
IP address of
the device to
send
HWTACACS
packets
In system view
hwtacacs nas-ip ip-address
Use either command
By default, the outbound port
serves as the source IP
address to send HWTACACS
packets.
z
If a HWTACACS server does not support a username with the domain name, you can configure the
device to remove the domain name before sending the username to the server.
z
The
nas-ip
command in HWTACACS scheme view is only for the current HWTACACS scheme,
while the
hwtacacs nas-ip
command in system view is for all HWTACACS schemes. However, the
nas-ip
command in HWTACACS scheme view overwrites the configuration of the
hwtacacs
nas-ip
command.
Setting Timers Regarding HWTACACS Servers
Follow these steps to set timers regarding HWTACACS servers:
To do… Use the command… Remarks
Enter system view
system-view
—
Create a HWTACACS scheme
and enter HWTACACS scheme
view
hwtacacs scheme
hwtacacs-scheme-name
Required
Not defined by default
Set the HWTACACS server
response timeout timer
timer response-timeout
seconds
Optional
5 seconds by default
Set the quiet timer for the
primary server
timer quiet minutes
Optional
5 minutes by default
Set the real-time accounting
interval
timer realtime-accounting
minutes
Optional
12 minutes by default