H3C S5120-EI Series, Руководство по эксплуатации

Страница: 1079 / 1191

1-9
To do… Use the command… Remarks
Configure the operation type
operation
{
get
|
put
}
Optional
By default, the operation type for the
FTP is
get
, that is, obtaining files
from the FTP server.
Configure a login username
username name
Required
By default, no login username is
configured.
Configure a login password
password password
Required
By default, no login password is
configured.
Specify a file to be transferred
between the FTP server and
the FTP client
filename file-name
Required
By default, no file is specified.
Configure common optional
parameters
See Configuring Optional
Parameters Common to an
NQA Test Group
Optional
z
When you execute the
put
command, a file
file-name
with fixed size and content is created on the
FTP server; when you execute the
get
command, the device does not save the files obtained from
the FTP server.
z
When you execute the
get
command, the FTP test cannot succeed if a file named
file-name
does
not exist on the FTP server.
z
When you execute the
get
command, please use a file with a smaller size as a big file may result in
test failure because of timeout, or may affect other services because of occupying too much
network bandwidth.
Configuring an HTTP Test
An HTTP test is used to test the connection between the NQA client and a specified HTTP server and
the time required to obtain data from the HTTP server, thus detecting the connectivity and performance
of the HTTP server.
Configuration prerequisites
Before performing an HTTP test, you need to configure the HTTP server.
Configuring an HTTP test
Follow these steps to configure an HTTP test:
To do… Use the command… Remarks
Enter system view
system-view
—
Enter NQA test group view
nqa entry admin-name
operation-tag
—