H3C S5120-EI Series, Руководство по эксплуатации

Страница: 863 / 1191

2-3
Figure 2-4
Set port parameters terminal window
z
Turn on the switch. The user will be prompted to press the Enter key if the switch successfully
completes POST (power-on self test). The prompt (such as <H3C>) appears after the user presses
the Enter key.
z
You can then configure the switch or check the information about the switch by executing
commands. You can also acquire help by type the ? character. Refer to the following chapters for
information about the commands.
Console Port Login Configuration
Common Configuration
Table 2-2 lists the common configuration of Console port login.
Table 2-2
Common configuration of Console port login
Configuration Description
Enter system view
system-view
—
Enter AUX user interface view
user-interface aux
0 —
Baud rate
speed
speed-value
Optional
The default baud rate is 9,600
bps.
Check mode
parity
{
even
|
mark
|
none
|
odd
|
space
}
Optional
By default, the check mode of
the Console port is set to
“none”, which means no check
bit.
Console port
configuration
Stop bits
stopbits
{
1
|
1.5
|
2
}
Optional
The default stop bits of a
Console port is 1.