Guildline 6530 Series, Руководство оператора

Страница: 23 / 158

Section 2
OM6530-C1-00
19 November, 2019
2-5
2.4.3.1.SOURCE CONNECTOR
Lethal voltages of up to 1000 volts may be present at this output and appropriate
precautionary measures are necessary.
UNQUALIFIED OR UNINFORMED
PERSONNEL SHOULD NOT BE GIVEN ACCESS TO THIS
EQUIPMENT.
The selected voltage is present at the center conductor of the high voltage BNC
connector whenever the TEST VOLTS display indicates its numeric value and the
LED above the source connector is illuminated. While the source can only
generate three or four milliamperes at a steady rate, the output filter capacitors,
can produce considerably greater currents for short periods of time. The
SOURCE cable provided with the 6530 is HV BNC at the instrument end and
Type-N at the U.U.T. end to provide direct connection with Guildline 9336 and
9337 series resistors. Other connector end cables are available as an option.
2.4.3.2.INPUT CONNECTOR
The sensitivity and very high impedances (100k ohm) at this connector require
careful handling. Large static discharges to this connector should be avoided.
One terminal of the unknown resistance or current is connected to the center
conductor of the triax connector. The INPUT cable provided with the 6530 is
Triax at the instrument end and Type-N at the U.U.T. end to provide direct
connection with out 9336 and 9337 series resistors. Other connector end cables
are available as an option.