GUILCOR AR004926, Инструкция по эксплуатации, Страница: 7 / 75

7
Getting started
Multilogger in portable application
•
Connect the appropriate probes and signals to the device - for the
DigiS/M, DigiL/M and Pt1000/M probes, follow the optical key for correct
orientation of the connector. Probes of the DigiL/M-xx line with a cable
can placed in the holder on the side of device (optional accessory). For
more information, see Chapter
“INPUT
S OF MULTILOGGER
”
.
•
Switch on the Multilogger - push the switch button on the device. The
display lights and the instrument starts working. If you will communicate
with PC via the Ethernet interface, the power adapter +5V DC is
necessary (supplied accessories). For more information, see Chapter
“POWER SUPPLY OF
MULTILOGGER
”.
•
Install Vision software to your computer - it is available at
www.
guilcor
.com . If you purchased a license for full version,
register it.

Connect Multilogger with your PC - you can use the USB, Ethernet or
RS232 port (special cable necessary). The external power supply is
needed for Ethernet interface communication. For more information, see
Chapter
“CONNECTING
WITH THE
COMPUTER”
.

Device settings - use SW to set up the device in accordance with the
connected probes and your requirements. If you are not going to use the
device soon, turn it off and place it in its transportation case. For more
information, see Chapter
“
DEVICE SETUP USING SOFTWARE
”
.

Measurements - remove the Multilogger from the transportation case,
connect probes and external power adapter (if needed) and turn the
device on. Some device settings can be changed from its keyboard.
When measurement ends, move the device to your computer room and
download the recorded data to PC. For more information, see Chapter
“
KEYBOARD OPERATION
”
.

Charging batteries - if the Multilogger includes rechargeable batteries,
you can recharge them when needed. For more information, see also
Chapter
“POWER SUPPLY
OF MULTILOGGER
”.

Maintenance and periodic inspections - In order to secure reliable
operation of the device, it is recommended to make regular inspections. For
more information, see part “OPERATION AND MAINTENANCE
RECOMMENDATIONS”.