GUILCOR AR004926, Инструкция по эксплуатации, Страница: 62 / 75

62

Custom Pt1000 RTD probe for temperature
measuring
The input parameters are identical to the above
described Pt1000/M. For these probes, you have
to compensate the cable length using the
User
calibration manual settings. The connector wiring
is shown in Appendix 4. The manufacturer
recommends to preferably use the Pt1000/M
intelligent probes.

External CO
2
probe
Measured quantity:
CO
2
concentration in the air
Input device range (limited by probe connected):
0 to max 65 000 ppm
Accuracy (according to the connected probe,
always at 23 °C and 1,013 hPa)
:
0 to 10 000 ppm probe
± (100 ppm + 5
% of the measured value)
0 to 50 000 ppm probe
± (
750 ppm + 2% of the measured value)
Cable length:
according to the order 1m, 2m, 4m
___________________________________________________________________________________________
This probe can be connected to the input No. 1 of the
model
AR005056
only.
Universal input with a miniature thermocouple connector __
The input is equipped with a white, uncompensated miniature
thermocouple connector. Compensation of the cold junction
temperature is performed by measuring the temperature inside
of the device in the area between the input connectors. The
inputs are not galvanically isolated from each other, nor from
other signals connected to the device. In order to secure correct
measurements, you need to prevent undesirable coupling.
Furthermore, the Multilogger has to be placed in its working
position and temperature stabilized.
Models equipped with this input:
AR006360
Input 1 Input 2 Input 3 Input 4
AR005173
Input 3 Input 4