GUILCOR AR004926, Инструкция по эксплуатации, Страница: 35 / 75

35
Device setup using software
Upon being the Multilogger switched on using the red button, the device
begins to take measurements and to record and evaluate alarms according
its user configuration. Complete configuration of the device can be
done using the
Vision software. Some parameters can be changed from
the device keyboard or from its web pages. When editing the Multilogger
configuration, the device normally works, however, access to some of its
functions is limited (downloading records, editing of the device configuration
by other users).
Device configuration basics
•
Connect the Multilogger with your computer and launch the
Vision software.
•
If the software not communicated with this device yet, add Multilogger to
the list of your devices. For more information see part
“CONNECTING THE MULTILLOGER
WITH THE
COMPUTER”
.
•
If the Multilogger is correctly connected, the Device Home panel displays
its current status.
•
Click on the Configuration button. The device configuration is loaded and
you can view or edit it.
•
When you make a configuration change of any items, the SW goes to
the editing mode and limits the device access for other users now.
•
Upon a long user inactivity period, the editing configuration mode is
automatically terminated.
•
Finally, save the new configuration to the Multilogger ( Apply changes ).
Device configuration items
General - Information _____________________________
Here are displayed the basic information about the connected
Multilogger. It includes its name (
Device name ), which is used for
identifying your device and its measured values. The instrument can
be named according to of its application or you can use the default
name. The maximal length of the
Device name is 32 characters - use
letters, numbers, underscore characters, etc. Moreover, this panel
states the serial number, model name and firmware version.