GUILCOR AR004926, Инструкция по эксплуатации, Страница: 56 / 75

56
Fast charging mode current:
approximately 350 mA
________________________________________________________________________________________________
Fast charging has to be activated by the Multilogger user.
During the fast charging, the Multilogger does not take any
measurements nor recording and does not communicate with
the computer.
Fast charging time:
Up to 6 hours
Fast charging restriction:
Allowed in ambient temperature from
0 °C
to
40 °C
.
ALARM OUT output
This output has been designed, for example, for external acoustic
signalization or a telephone dialer. The way of its activation can be
programmed when configuring the Multilogger. The open connector
transistor (OUT), external power voltage (+5 V) and common terminal
(GND) are available on the device terminals. The wiring of the output
circuits is shown in Appendix 2.
Maximum current of OUT terminal (output switched on):
100 mA
Impedance of switched on output (OUT-GND):
<
1 Ω
Maximum tolerant voltage (OUT-GND, output switched off):
+24 V DC
Supply voltage at +5 V terminal:
+5 V DC from power connector or USB
________________________________________________________________________________________________
This voltage is available when the Multilogger is powered from
an external power supply only.
Maximum cable length:
30 m, only in interior areas
The external audio unit (optional accessory MP026) is designed as wall
mounted and it is connected using the CINCH connector (outer lead: OUT,
central lead: +5 V).